pattern

Follow These Five Easy Steps Click here for a printed order form for mailing or faxing. Acrobat Reader is required. Get it for free by clicking the gold adobe logo.
1.	Line Pattern paper up with the split in the table where the two halves meet. If there is no split, the entire table must be traced by taping two or more pieces of paper together.
2.	Lightly secure pattern paper to table using masking tape to prevent sliding or wrinkling. ( Books may also be used to hold paper in place).
3.	Trace the outline of the table (flat surface only) with the flat side (not the point) of a pencil or dark crayon. Do not include decorative molding around perimeter or sloped edges (see diagram below) and do not include extension leaves. It is always best to take out the extension leaves when tracing the pattern.
4.	Your pattern should measure within 1/8" of table measurements due to creases in the paper. Please check for accuracy by using a metal or wood ruler as cloth rulers may stretch or shrink.
5.	Make sure you fill out the form printed on the pattern paper prior to mailing it to us.